Case® / IH®
 

Engine Model # QPP Part # Application Part # or Casting # Wt.
D154, 154 C.I.D.
2.5 Liter
D165, 165 C.I.D.
2.7 Liter
D171, 171 C.I.D.
4 Cylinde

QP3110995R91I

Crankshaft Photo

 BD154, 144, 364, 384, 444 Tractors
2424, S, SC, SE Tractors
780, 880, 885, 4600 Tractors		 05700AB
751303
751303R2
751303R3
751303R5		 38 lbs
Stroke / Bore Rod / Main Journal Observations Cylinder Head
4.000
Bore:
(154) - 3.500
(165) - 3.625
(171) - 3.6875		 2.3740-2.3750
2.4990-2.5000		 Flange: 4 Bolt Holes, 2 Dowel PinHoles
Snout: Threaded on End, 2 Key Ways, No Centering Ring
4 Cylinder


Engine Model # QPP Part # Application Part # or Casting # Wt.
188 Splined
188 C.I.D.
3.1 Liter
4 Cylinder

QPA151015

Download Technical Bulletin

Crankshaft Photo

 430, 440, 441, 470, 480, 504, 530, 570, 580, 580B, 630, 640 Wheel Tractors, W3, W5A, 480C, 580C, 1845 Wheel Loaders, 2504, 3514 600, 660 Combines, 310E, 310F, 310G, 350, 450 Crawler Tractor 1150, 1155, 1255 Windrowers, H-25B 976321
A39151
G-11740
G-11741		 76 lbs
Stroke / Bore Rod / Main Journal Observations Cylinder Head
4.125
Bore:
   Diesel
3.8110-3.8120
   Gas
3.8130-3.8145		 2.0605-2.0615
2.8730-2.8740		 Flange: Flat, No Centering Ring, 4 Bolt Holes, Splined - 13 Grooves, Pilot Hole has 13 Splines (13 peaks, 13 valleys)
Snout: Threaded, 2 Key Ways,
4 Cylinder


Engine Model # QPP Part # Application Part # or Casting # Wt.
188 Bushing
188 C.I.D.
3.1 Liter
4 Cylinder

QPA39150

Download Technical Bulletin

Crankshaft Photo

 430, 440, 441, 470, 480, 504, 530, 570, 580, 580B, 630, 640 Wheel Tractors, W3, W5A, 480C, 580C, 1845 Wheel Loaders, 2504, 3514, 600, 660, Combines, 310E, 310F, 310G, 350, 450 Crawler Tractor, 1150 1155, 1255 Windrowers, H-25B 976321
A39151
G-11740
G-11741		 76 lbs
Stroke / Bore Rod / Main Journal Observations Cylinder Head
4.125
Bore:
   Diesel
3.8110-3.8120
Gas
   3.8130-3.8145		 2.3740-2.3750
Frt Main: 2.435-2.4365
Ctr Main: 2.4770-2.4780
Rr Main: 2.4770-2.4780		 Flange: Flat, No Centering Ring, 4 Bolt Holes, Open Pilot Hole
Snout: Threaded, 2 Key Ways
4 Cylinder


Engine Model # QPP Part # Application Part # or Casting # Wt.
207 Non Turbo
207 C.I.D.
3.4 Liter
4 Cylinder

QPA144011

Download Technical Bulletin

Crankshaft Photo

 350, 450, 450B Crawlers
580C, 580D Wheel Tractor		 976321 77 lbs
Stroke / Bore Rod / Main Journal Observations Cylinder Head
4.125
4.0000-4.0010		 2.2480-2.2490
2.8730-2.8740		 Flange: Flat, No Centering Ring, 4 Bolt Holes, Open Pilot Hole
Snout: Threaded, 2 Key Ways
4 Cylinder


Engine Model # QPP Part # Application Part # or Casting # Wt.
D239
239 C.I.D.
3.9 Liter
4 Cylinder

QP3144626R91I

Crankshaft Photo

 544, 574, 674, 684 685 Backhoe
685 Tractor, TD7, TD7E, TD8C
Crawler Tractors, TD8 Dozer		 015C1               3132752R3
015C1 1089     3144626
182752R2        37CR4
2744406R1      IH625R2		 81 lbs
Stroke / Bore Rod / Main Journal Observations Cylinder Head
5.0600
3.875		 2.5185-2.5193
3.1484-3.1492		 Flange: Flat, No Centering Ring, 7 Bolt Holes, 1 Dowel
Snout: Straight, 3 Bolt Holes, 1 Key Way
Timing Gear installed, L-Hand Helix, 33 Teeth, part # 3055028RI.
R- Hand Helix Balance Gear, 80 Teeth, part # 3136237R1, in center.
4 Cylinder


Engine Model # QPP Part # Application Part # or Casting # Wt.
D268
268 C.I.D.
4.4 Liter
4 Cylinder

QP3228376R91I

Crankshaft Photo

 510B Loader
Neuss Diesel		 218528R1     528R2-79
218528R2     A09-7292
218528R3
3.218528R1		 91 lbs
Stroke / Bore Rod / Main Journal Observations Cylinder Head
5.5000
3.9370		 2.5185-2.5193
3.1484-3.1492		 Flange: Flat, No Centering Ring, 7 Bolt Holes
Snout: Straight, 3 Bolt Holes, 1 Key Way
Timing Gear installed, L-Hand Helix, 33 Teeth, part # 3055028R1.
W/Straight Balance Gear in Center- 90 teeth,
4 Cylinder


Engine Model # QPP Part # Application Part # or Casting # Wt.
D358
358 C.I.D.
5.8 Liter
6 Cylinder

QP3059514R1I

Crankshaft Photo

 826, 886, 955XC, 1420, 2826
3088, 3288 Wheel Tractors
D, DT358, Neuss Diesel		 3059514R1
3136036R95		 150 lbs
Stroke / Bore Rod / Main Journal Observations Cylinder Head
5.059
3.8750-3.8759		 2.5185-2.5193
3.1484-3.1492		 Flange: Flat, No Centering Ring, 7 Bolt Holes, 1 Dowel
Snout: 3 Bolt Holes
6 Cylinder
(Bolt On Counterweights)


Engine Model # QPP Part # Application Part # or Casting # Wt.
D414, DT414
414 C.I.D.
6.8 Liter
6 Cylinde

QP675050C1

Crankshaft Photo

 966, 1066, 1086, 1586, 4186 Wheel Tractors, 815 Combine
H-65C Loader, E-200 Scraper		 675050
675050C
675050C1
675668		 200 lbs
Stroke / Bore Rod / Main Journal Observations Cylinder Head
4.750
4.3005-4.3015		 2.9977-2.9990
3.3742-3.3755		 Flange: Flat, No Centering Ring, 8 Bolt Holes
Snout: Straight, 3 Bolt Holes, 1 Key Way
6 Cylinder


Engine Model # QPP Part # Application Part # or Casting # Wt.
D436, DT436
436 C.I.D.
7.1 Liter
6 Cylinder

QP675051C1

Crankshaft Photo

 986, 1466, 1486, 1566, 1586, 3688, 4166, 4186 Wheel Tractors, 100-Hydro, 1460, 1480 Combines 675051
675051C
675051C1		 200 lbs
Stroke / Bore Rod / Main Journal Observations Cylinder Head
5.004
4.300		 2.9977-2.9990
3.3742-3.3755		 Flange: Flat, No Centering Ring, 8 Bolt Holes
Snout: Straight, 3 Bolt Holes, 1 Key Way
6 Cylinder


Engine Model # QPP Part # Application Part # or Casting # Wt.
DT466
466 C.I.D.
7.6 Liter
6 Cylinder

QP675669C93

Crankshaft Photo

 DT466B, DTI466B, DT466C, TD12, TD15C, TD15E, Crawler, 3588, 3788, 4366, 4386, 5288, 5488 Wheel Tractors
H80B, L175C Loader, E412 Scraper		 1816975C1    675591C2
1821913    675591C3
675591C    675591C4		 200 lbs
Stroke / Bore Rod / Main Journal Observations Cylinder Head
5.350
4.3005-4.301		 2.9977-2.9990
3.3742-3.3755		 Flange: Flat, No Centering Ring, 8 Bolt Holes
Snout: Straight, 3 Bolt Holes, 1 Key Way w/Oil Pump Drive Gear installed
6 Cylinder


Engine Model # QPP Part # Application Part # or Casting # Wt.
DT466E
466 C.I.D.
7.6 Liter
6 Cylinder

QP1830596C91

Download Technical Bulletin

Crankshaft Photo

 Vehicular 1995–1999 Only 1821914C1
1820299C1		 185 lbs
Stroke / Bore Rod / Main Journal Observations Cylinder Head
5.350
4.3005-4.3015		 3.1494-3.1506
3.5344-3.5356		 Flange: Centering Ring, 12 Bolt Holes, 1 Dowel Hole
Snout: Straight, 3 Bolt Holes, 1 Dowel Hole, 1 Key Way
1 Dowel Hole in front edge of #1 Main for Timing Gear Alignment.
6 Cylinder
The bore size was changed in 2000 to 4.590", stroke was changed to 4.680".

Toll Free (888) 333-3210
The use of the original manufacturers' part numbers, e.g. CASE® and JOHN DEERE®, are for reference purposes only - the parts offered are notoriginal manufacturers' parts. Quality Power Products, Inc., sells replacement parts for use in the equipment of various manufacturers. QualityPower Products, Inc., and the listed belts contained herein are not sponsored, affiliated, or otherwise connected in any way with the equipmentmanufacturers named in this catalog.