Navistar®
 

Engine Model # QPP Part # Application Part # or Casting # Wt.
D154, 154 C.I.D.
2.5 Liter
G164, 164 C.I.D.
2.7 Liter
D165, 165 C.I.D.
2.7 Liter
D171, 171 C.I.D.
2.8 Liter
4 Cylinder

QP3110995R91I

Crankshaft Photo

 144, 364, 384, 444 Tractors
S, SC, SE Tractors
Gas, 350, 500B, 600B, 780, 880, 885, 4600 Tractors		 05700AB
751303
751303R2
751303R3
751303R5
8629 (DB TRACTOR)		 38 lbs
Stroke / Bore Rod / Main Journal Observations Cylinder Head
4.000
Bore:
     (154) - 3.500
     (165) - 3.625
     (171) - 3.6875		 2.3740-2.3750
2.4990-2.5000		 Flange: 4 Bolt Holes, 2 Dowel Holes
Snout: Threaded on End, 2 Key Ways
4 Cylinder


Engine Model # QPP Part # Application Part # or Casting # Wt.
D239
239 C.I.D.
3.9 Liter
4 Cylinder

QP3144626R91I

Crankshaft Photo

 544, 574, 674, 684 685 Backhoe
685 Tractor, TD7, TD7E, TD8C
Crawler Tractors, TD8 Dozer		 015C1     3132752R3
015C1 1089     3144626
182752R2     37CR4
2744406R1     IH625R2		 81 lbs
Stroke / Bore Rod / Main Journal Observations Cylinder Head
5.0625
3.875		 2.5185-2.5193
3.1484-3.1492		 Flange: Flat, No Centering Ring, 7 Bolt Holes, 1 Dowel Hole
Snout: Straight, 3 Bolt Holes, 1 Key Way
w/Helical Balance Gear in Center - 80 teeth
4 Cylinder


Engine Model # QPP Part # Application Part # or Casting # Wt.
D268
268 C.I.D.
4.4 Liter
4 Cylinder

QP3228376R91I

Crankshaft Photo

 510B Loader
Neuss Diesel (German Built)		 218528R1     528R2-79
218528R2     A09-7292
218528R3
3.218528R1		 91 lbs
Stroke / Bore Rod / Main Journal Observations Cylinder Head
5.5000
3.9370		 2.5185-2.5193
3.1484-3.1492		 Flange: Flat, No Centering Ring, 7 Bolt Holes
Snout: Straight, 3 Bolt Holes, 1 Key Way
w/Straight Balance Gear in Center- 90 teeth
4 Cylinder


Engine Model # QPP Part # Application Part # or Casting # Wt.
D358
358 C.I.D.
5.8 Liter
6 Cylinder

QP3059514R1I

Crankshaft Photo

 826, 886, 955XC, 1420, 2826
3088, 3288 Wheel Tractors
D, DT358, Neuss Diesel		 3059514R1
3136036R95		 150 lbs
Stroke / Bore Rod / Main Journal Observations Cylinder Head
5.059
3.8750-3.8759		 2.5185-2.5193
3.1484-3.1492		 Flange: Flat, No Centering Ring, 7 Bolt Holes, 1 Dowel Hole
Snout: w/Gear, 3 Bolt Holes
6 Cylinder
(Bolt On Counterweights)


Engine Model # QPP Part # Application Part # or Casting # Wt.
DT360
360 C.I.D.
5.9 Liter
6 Cylinder

QP1809953C91

Crankshaft Photo

 DT360, DT360, DTA360 Diesel Truck
Trucks: 1987-1993 International		 1809953C91
1809954C1		 120 lbs
Stroke / Bore Rod / Main Journal Observations Cylinder Head
4.751
4.0095-4.0105		 2.5182-2.5197
3.3742-3.3755		 Flange: Flat, No Centering Ring, 8 Bolt Holes
Snout: 1 Key Way, 3 Bolt Holes
Add Timing Gear installed, L-Hand Helix, 33 Teeth, #675406C1
Oil Pump Drive Gear installed, 41 Teeth, part #675364C1
6 Cylinder


Engine Model # QPP Part # Application Part # or Casting # Wt.
D-414, DT414
414 C.I.D.
6.8 Liter
6 Cylinder

QP675050C1

Crankshaft Photo

 966, 1066, 1086 Wheel Tractor
815 Combine
H-65C Loader, E-200 Scrape		 675050
675050C
675050C1
675668		 200 lbs
Stroke / Bore Rod / Main Journal Observations Cylinder Head
4.750
4.3005-4.3015		 2.9977-2.9990
3.3742-3.3755		 Flange: Flat, No Centering Ring, 8 Bolt Holes
Snout: Straight, 3 Bolt Holes, 1 Key Way
Timing Gear installed, L-Hand Helix, 33 Teeth, part # 675406C1.
Oil Pump Drive Gear installed, 41 Teeth, part # 675364C1.
6 Cylinder


Engine Model # QPP Part # Application Part # or Casting # Wt.
D436, DT436
436 C.I.D.
7.1 Liter
6 Cylinder

QP675051C1

Crankshaft Photo

 986, 1466, 1486, 1566, 1586, 3688,
4166, 4186 Wheel Tractors,
100-Hydro, 1460, 1480 Combines		 675051
675051C
675051C1		 200 lbs
Stroke / Bore Rod / Main Journal Observations Cylinder Head
5.004
4.300		 2.9977-2.9990
3.3742-3.3755		 Flange: Flat, No Centering Ring, 8 Bolt Holes
Snout: Straight, 3 Bolt Holes, 1 Key Way,
Timing Gear installed, L-Hand Helix, 33 Teeth, part # 675406C1.
Oil Pump Drive Gear installed, 41 Teeth, part # 675364C1.
6 Cylinder


Engine Model # QPP Part # Application Part # or Casting # Wt.
DT466
466 C.I.D.
7.6 Liter
6 Cylinder

QP675669C93

Download Technical Bulletin

Crankshaft Photo

 DT466B, DTI466B, DT466C,
TD12, TD15C, TD15E
Crawler, 3588, 3788, 4366, 4386
5288, 5488 Wheel Tractor,
H80B, L175C, Loader, E412 Scraper		 1816975C1     675591C2
1821913     675591C3
675591C     675591C4
675591C1
675591C3		 200 lbs
Stroke / Bore Rod / Main Journal Observations Cylinder Head
5.350
4.300		 2.9977-2.9990
3.3742-3.3755		 Flange: Flat, No Centering Ring, 8 Bolt Holes,
(the late style crankshaft has 12 Bolt Holes)
Snout: Straight, 3 Bolt Holes, 1 Key Way
Timing Gear installed, L-Hand Helix, 33 Teeth, part # 675406C1.
Oil Pump Drive Gear installed, 41 Teeth, part # 675364C1.
6 Cylinder


Engine Model # QPP Part # Application Part # or Casting # Wt.
DT466E
466 C.I.D.
7.6 Liter
6 Cylinder

QP1830596C91

Crankshaft Photo

 Vehicular 1995–1999 Only 1821914C1
1820299C1		 185 lbs
Stroke / Bore Rod / Main Journal Observations Cylinder Head
5.350
4.3005-4.3015		 3.1494-3.1506
3.5344-3.5356		 Flange: Centering Ring, 12 Bolt Holes, 1 Dowel Hole
Snout: Straight, 3 Bolt Holes, 1 Dowel Hole, 1 Key Way
6 Cylinder
The bore size was changed in 2000 to 4.590", stroke was shortened to 4.680".

Toll Free (888) 333-3210
The use of the original manufacturers' part numbers, e.g. CASE® and JOHN DEERE®, are for reference purposes only - the parts offered are notoriginal manufacturers' parts. Quality Power Products, Inc., sells replacement parts for use in the equipment of various manufacturers. QualityPower Products, Inc., and the listed belts contained herein are not sponsored, affiliated, or otherwise connected in any way with the equipmentmanufacturers named in this catalog.